JP-2001: Jeep Cherokee XJ Engine/Transmission Skid Plate (1984-2001)

Home/Jeep/Jeep Cherokee XJ (1984-2001), Jeep Comanche MJ (1986-1992)/JP-2001: Jeep Cherokee XJ Engine/Transmission Skid Plate (1984-2001)

JP-2001: Jeep Cherokee XJ Engine/Transmission Skid Plate (1984-2001)

$367.00

This Skid Row Offroad Engine/Transmission Skid Plate was designed to fit your 1984-2001 Jeep XJ Cherokee with the 4.0L six cylinder engine.

Material: Made of 3/16 inch thick steel
Finish: Semi-Gloss Black Powder Coat
Hardware: All Grade 5 zinc plated hardware is included
Origin: Made in USA

PLEASE CHECK FITMENT NOTES BEFORE ORDERING.

Description

This Skid Row Offroad Engine/Transmission Skid Plate was designed to fit your 1984-2001 Jeep XJ Cherokee with the 4.0L six cylinder engine. Designed specifically for this engine, it provides complete coverage for your vulnerable engine oil pan, transmission, AND the front portion of your exhaust system. One easily installed skid plate provides the complete protection you need for fun on the trail, while the diamond-shaped oil drain hole lets you perform regular maintenance without needing to remove the skid plate. This skid plate is made of 3/16″ thick steel that is laser-cut and CNC folded for consistent quality that sets the standard for Jeep skid plates. It is also reinforced with 1/4″ thick steel angle along the driver’s side to provide plenty of strength while easily clearing both your exhaust system and your driveshaft. It mounts solidly to the Jeep’s frame and is designed for easy bolt-on installation, but does require drilling of 2 holes though the transmission cross-member. It can be used on stock height vehicles or those with a suspension lift installed. We’ve also learned during our off-road testing that these engine/transmission skid plates help you get over obstacles by preventing your transfer case skid plate from catching on whatever you’re driving over. So you not only get added protection and peace of mind, your Jeep will be more capable as well!

Please Note the following:

  • Check the diagram below to determine the skid plate dimension for your Cherokee (It must be 14″ or the skid plate will not fit).
Oil Pan Skid Plate

To make sure this skid plate fits your Jeep Cherokee measure from the lower control arm mounting “box” to the leading edge of the transmission crossmember. It should be about 14″.

Additional information

Weight 48 lbs
Dimensions 36 × 4 × 26 in

Instructions

JP-2001 Install Instructions (PDF)

Fitment Notes

Please Note the following:

Check the diagram below to determine the skid plate dimension for your Cherokee (It must be 14″ or the skid plate will not fit).

 

Oil Pan Skid Plate

To make sure this skid plate fits your Jeep Cherokee measure from the lower control arm mounting “box” to the leading edge of the transmission crossmember. It should be about 14″.

Reviews

There are no reviews yet.

Be the first to review “JP-2001: Jeep Cherokee XJ Engine/Transmission Skid Plate (1984-2001)”

Your email address will not be published. Required fields are marked *